Here is a tutorial on making a pair of quilledjhumkas with studs using paper quilling strips.
Tools Needed:
- paper quilling strips
- flat back pearls.
- Wire Cutter
- Round Nose Pliers
- Flat Nose Pliers
Making process of Quilled Jhumkas:
Step 1:
Insert a paper strip in a slotted quilling
needle.
Keep quilling till you make a tight coil of the
desired size. Quilling strips of two colors were glued together before quilling
the coil. Glue the end so that the coil is secure.
Step 2:
Slide and remove the coil from the slotted
tool.
Step 3:
Using your finger gently push from the center
of one side of the coil to form a cup like structure. Apply a coat of fabric
glue on the inside of the cup and the outside. Allow it to dry. The structure
will be secure now.
Step 4:
Insert an eye pin from the bottom of the cup. Insert
a small metal bead spacer on the top. Make a small loop at the top of the
jhumka as shown. Round nose pliers have been used to make this loop.
Step 5:
Insert a jump ring into the loop. You can use
flat nose pliers to open and close the jump ring. Now for the top part or the
stud, make a smaller tightly quilled paper coil.
Step 6:
Glue on a flat back pearl at the center of this
coil. This step is optional.Now apply glue on a earring post.Attach the small
coil made in step 12 to the earring post. It has to hold on well… allow it to
dry completely.
Step 7:
Slide the jump ring attached to the jhumka in
the wire of the earring post and insert the ear backs.Repeat the steps above
for the other earring. And we have the
completed pair of quilled jhumkas…
